How to prevent cracking and deformation of wood plastic floor

1. Select qualified wood-plastic floor and keel. Now the wood-plastic floor material on the market is not level. Pay attention to the uniform material density, the finer wood powder material, the fusion of wood powder and plastic, and the deformation of the floor. Will be small and more durable.

 

2, wood plastic keel in the paving process, the fixed expansion screw spacing is controlled at about 400-500, should not be too large, and ensure that the screws are fixed and firm during the installation process, not recommended to replace; the length of a single keel does not exceed 3 The rice is suitable; the double seam keel is used at the joint of the floor to ensure the fixed strength of the floor. In addition, if the construction workers do not know the characteristics of the wood-plastic floor, it is recommended to use the steel keel. The flatness of the steel keel is higher and the welding is stronger.

 

3. When the wood-plastic floor is paved, the length of the single floor shall not exceed 2.5 meters; a gap of 4-5 mm shall be reserved at the joint between the floor and the floor to ensure sufficient space for the wood-plastic to expand and contract in the later stage.

 

4. The wood-plastic floor is basically maintenance-free, and it is mainly kept clean. When cleaning the wood-plastic floor, first wipe the rice water directly with a rag, and evenly spray the rice water on the wooden floor, then wait 5 to 10 minutes, wipe it with a dry rag, wood The plastic floor will become much cleaner. Wood-plastic panels are waterproof, moisture-proof, insect-proof, termite-proof, and environmentally friendly. However, if it is in the water, it will affect the quality of the wood-plastic panel. It is recommended not to place the wood-plastic panel in the water for a long time.