Storage precautions for WPC flooring

Nowadays more and more people are choosing plastic wood flooring, and the reasons for choosing plastic wood flooring are different. Here, Huasu introduces you to the storage and maintenance methods of plastic wood profiles.

To understand how to store plastic wood and the maintenance of plastic wood, you need to understand some characteristics of plastic wood: Because plastic wood is wrapped around a natural fiber such as wood fiber, the water absorption rate of plastic wood is very low. Very suitable for waterfront landscapes.

Compared with general wood, plastic wood is much more important than plastic wood, usually between 1.1 and 1.18, while the general wood has a specific gravity of 0.4 to 0.7. Even for hardwood with a large specific gravity, the specific gravity is only about 1.0. Therefore, the same volume of plastic wood is much heavier.

It can be bent by heating the wood. And the plastic wood can be bent to a certain extent. Therefore, when storing for a long time, care should be taken on a flat surface to prevent deformation.

Plastic wood flooring is a new type of environmentally-friendly wood-plastic composite material. The wood phenol produced in the process of producing medium and high-density fiberboard is added into recycled plastics and then made into wood-plastic composite material through granulation equipment, and then extruded into production group. Made of wood-plastic flooring, it has many advantages, and it is one of the first choices for people's home decoration materials. However, merchants or customers need to pay attention to the storage of plastic wood flooring.

1. Although the plastic wood floor has the effect of waterproof and moisture proof, it is still necessary to ensure the drying and ventilation of the storage place. After putting the floor into the warehouse, always pay attention to ventilation to ensure the indoor clean and dry, which can be obtained for the storage time of the floor itself. Prolonged, still very helpful;

2, the floor should be placed flat, this is the key to ensure that the floor to prevent deformation, the only way to make the plastic wood floor storage time is longer;

3, you can use plastic film to wrap outside, this is the key to prevent falling ash. In order to ensure the breathability, it is also possible to poke a few holes in the plastic film to ensure the smoothness of the air, so that the floor is in an optimal state for storage. At the same time, during storage, keep away from water sources or places with power supply to ensure safe storage without any worries.

In order not to affect future sales, it is best to use a plastic film to wrap outside during storage, which is the key to preventing ash falling. In order to ensure the breathability, it is also possible to poke a few holes in the plastic film to ensure the smoothness of the air, so that the floor is in an optimal state for storage. At the same time, during storage, keep away from water sources or places with power supply to ensure safe storage without any worries.

Plastic wood flooring is observed from the comprehensive level of all aspects, and it is the most cost-effective form of expression. Properly mastering effective storage methods is an important factor to ensure that unnecessary problems occur in the sales of the floor in the later stage. The use of the results meets the consumer's auditing standards.

How to prevent chromatic aberration during the production of wood plastic materials